EMC DS-32B2 User Manual
1
ptphantomshow
1-371
Telnet Commands
ptphantomshow
Display port routing tables.
Syntax
ptphantomshow [slot/]port
Availability
All Users
Description
Use this command to display the ASIC routing table contents for the
specified port. If the slot is not specified, then the slot specified with
specified port. If the slot is not specified, then the slot specified with
setslot
is used.
Operands
This command has the following operands:
Example
To display the port routing tables for slot 8 port 1:
switch:admin> ptphantomshow 8/1
Looking for port 1 in path: /proc/fabos/blade/8
Found file: /proc/fabos/blade/8/0/0/1/asic1/phantom
Found file: /proc/fabos/blade/8/0/0/1/asic1/phantom
Port Routing table for slot: 8, port: 1
The following alpas are private on some switch ports:(alpa, UI port bitmap on
the blade)
the blade)
plt_cam table and plt_alpa table:
index sid plt_alpas(UI port 15 - 0 w 1 byte/port)
index sid plt_alpas(UI port 15 - 0 w 1 byte/port)
plt_did table for this port:
ali alpa sid ali alpa sid ali alpa sid
ali alpa sid ali alpa sid ali alpa sid
my_alpa:
switch:admin>
switch:admin>
See Also
ptdatashow
ptpropshow
ptregshow
ptrouteshow
ptstatsshow
ptpropshow
ptregshow
ptrouteshow
ptstatsshow
slot
Specify the slot number of the blade where you
want to view the port routing tables. This
operand is optional.
want to view the port routing tables. This
operand is optional.
port
Specify the port within the blade to be displayed.
Valid values for port number vary depending on
switch type. This operand is required.
Valid values for port number vary depending on
switch type. This operand is required.