EMC DS-32B2 User Manual
1
1-374
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
ptrouteshow
Display port routing properties.
Syntax
ptrouteshow [slot]/port
Availability
All Users
Description
Use this command to display the ASIC port routing properties for the
specified port. If the slot is not specified, then the slot specified with
specified port. If the slot is not specified, then the slot specified with
setslot
is used.
Operands
This command has the following operands:
Example
To display the port routing properties for slot 8 port 1:
switch:admin> ptrouteshow 8/1
Looking for port 1 in path: /proc/fabos/blade/8
Found file: /proc/fabos/blade/8/0/0/1/asic1/route
Looking for port 1 in path: /proc/fabos/blade/8
Found file: /proc/fabos/blade/8/0/0/1/asic1/route
Port Routing table for slot: 8, port: 1
port address ID: 0x000000
external unicast routing table:
internal unicast routing table:
multicast routing table:
broadcast routing table:
0x0
switch:admin>
external unicast routing table:
internal unicast routing table:
multicast routing table:
broadcast routing table:
0x0
switch:admin>
See Also
ptdatashow
ptphantomshow
ptpropshow
ptregshow
ptstatsshow
ptphantomshow
ptpropshow
ptregshow
ptstatsshow
slot
Specify the slot number of the blade where you
want to view the port routing properties. This
operand is optional.
want to view the port routing properties. This
operand is optional.
port
Specify the port within the blade to be displayed.
Valid values for port number vary depending on
switch type. This operand is required.
Valid values for port number vary depending on
switch type. This operand is required.