EMC DS-32B2 User Manual
1
snmpMibCapSet
1-409
Telnet Commands
snmpMibCapSet
View and modify options for configuring SNMP MIB/Trap
capability.
capability.
Syntax
snmpMibCapSet
Availability
Admin
Description
Use this command to turn on or off certain MIBs and TRAPs. This
command also enables a user to turn on or off group information and
SSN in SW trap messages. It first displays current settings and then
prompts the user to change the values for each parameter.
command also enables a user to turn on or off group information and
SSN in SW trap messages. It first displays current settings and then
prompts the user to change the values for each parameter.
◆
FA-MIB - Specifying yes means the user can access FA MIB
variables with an SNMP manager. The default value is yes.
variables with an SNMP manager. The default value is yes.
◆
SW-TRAP - Specifying yes means the SNMP management
application can receive SW traps from the switch. The default
value is yes.
application can receive SW traps from the switch. The default
value is yes.
◆
FA-TRAP - Specifying yes means the SNMP management
application can receive FA traps from the switch. The default
value is yes.
application can receive FA traps from the switch. The default
value is yes.
Operands
None
Example
To view or modify the options for configuring SNMP MIB traps:
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes] y
SW-TRAP (yes, y, no, n): [yes] y
FA-TRAP (yes, y, no, n): [yes] y
SW-EXTTRAP (yes, y, no, n): [no] y
SB5_12000B_0:admin>
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes] y
SW-TRAP (yes, y, no, n): [yes] y
FA-TRAP (yes, y, no, n): [yes] y
SW-EXTTRAP (yes, y, no, n): [no] y
SB5_12000B_0:admin>
See Also
agtcfgShow
agtcfgSet
agtcfgDefault
agtcfgSet
agtcfgDefault