EMC DS-32B2 User Manual

Disable the switch.

switchDisable

Admin 

Use this command to disable the switch. All Fibre Channel ports are 
taken off line; if the switch was part of a fabric, the remaining 
switches reconfigure.

The switch must be disabled before making configuration changes 
(using 

configure

 or 

configDefault

) or before running many of the 

diagnostic tests. All commands that require the switch to be disabled 
send an error if invoked while the switch is enabled.

The switch does not need to be disabled before rebooting or 
powering off.

As each port is disabled, the front-panel LED changes to a slow 
flashing yellow.

None

switch:admin> switchDisable

switchEnable
switchShow