EMC DS-32B2 User Manual
1
trackChangesSet
1-463
Telnet Commands
trackChangesSet
Enable configuring of Track Changes feature.
Syntax
trackChangesSet [ mode ], [ snmptrapmode ]
Availability
Admin
Description
Use this command to enable or disable the Track Changes feature. An
SNMP-TRAP mode can also be enabled. Trackable changes are:
SNMP-TRAP mode can also be enabled. Trackable changes are:
◆
Successful login
◆
Unsuccessful login
◆
Logout
◆
Config file change from task
◆
Track Changes on
◆
Track Changes off
The output from the Track Changes feature is dumped to the error log
for the switch. Use the
for the switch. Use the
errDump
command or
errShow
command to
view the error log.
Operands
This command has the following operands:
mode
Specify 1 to enable the Track Changes feature or
specify 0 to disable the feature. The default (if no
operand is specified) is to disable the Track
Changes feature. This operand is optional.
specify 0 to disable the feature. The default (if no
operand is specified) is to disable the Track
Changes feature. This operand is optional.
snmptrapmode
Specify 1 to enable errors to be sent to the
SNMP-TRAP in addition to the errlog or specify
0 to disable the SNMP-TRAP messages. The
default (if no operand is specified) is to disable
SNMP-TRAP messages. This operand is optional
SNMP-TRAP in addition to the errlog or specify
0 to disable the SNMP-TRAP messages. The
default (if no operand is specified) is to disable
SNMP-TRAP messages. This operand is optional