EMC DS-32B2 User Manual

Display ASIC chip property contents.

chippropshow [slot/]chip | [slot] -all

All users

Use this command to display the ASIC chip property contents for the 
specified chip on the specified blade slot. If the slot operand is not 
specified, then the slot defined using the 

setslot

 command is used.

This command has the following operands:

switch:admin> chippropshow 7 -all

Looking for chip 0 in path: /proc/fabos/blade/7

slot: 7, minis: 0, chip: 0

[1657/0001,0104,2/8]

slot: 7, minis: 0, chip: 1

[1657/0001,0104,2/8]

slot: 7, minis: 1, chip: 0

[1657/0001,0104,2/8]

slot: 7, minis: 1, chip: 1

[1657/0001,0104,2/8]

slot: 7, minis: 2, chip: 0

[1657/0001,0104,2/8]

slot: 7, minis: 2, chip: 1

[1657/0001,0104,2/8]

slot: 7, minis: 3, chip: 0

[1657/0001,0104,2/8]

slot: 7, minis: 3, chip: 1

[1657/0001,0104,2/8]

san95:admin>

Specify the slot number for the blade for which you 
want to view the chip properties. This operand is 
optional.

Specify the index of the chip within the blade to be 
displayed. This operand is optional.

Specify this operand to display the properties for all 
minis on the blade. This operand is optional.