Siemens KVM series 3-1621 User Manual
Basic operations
40
590-591-
609
B
3.12.2
Removing a target device from the scan list
To select a target device to be removed from the scan list, complete one of the
following steps:
following steps:
•
In the Scan window, clear the check box next to the target device to be
removed.
removed.
-or-
•
Double-click on the target device name or port.
-or-
•
Press Shift + Delete to remove the selected target device and all entries below
it.
it.
-or-
•
Click the Clear button to remove all target devices from the scan list.
Click OK.
3.12.3
Starting the scan mode
Click Commands. The Commands window opens.
Figure 26: Commands window
Select Scan Enable in the Commands window. Scanning will begin immediately.
Click X to close the commands window.