Extreme networks 12802 User Manual

BlackDiamond 12800 Series Switches Hardware Installation Guide

This section lists specifications for the power supplies that are installed in the following BlackDiamond 
switches:

●

BlackDiamond 12804 switch

●

BlackDiamond 12802 switch

Operating conditions

Operating temperature range 0° C to 40° C (32° F to 104° F)
Operating humidity:10% to 93% relative humidity, non-condensing
Operating altitude 0 to 3000 meters (0 to 9,850 ft)
Operational shock: 30 m/s

2

 (3 g), 11 ms, 60 shocks

Operational random vibration: 5 to 500 Hz @ 1.5g rms

Storage & transportation 
conditions (packaged)

Transportation temperature: –40° C to 70° C (–40° F to 158° F)
Storage and transportation humidity: 10% to 93% relative humidity, 
non-condensing
Packaged shock (half sine): 

<50 kg 180 m/s

2

 (10 g), 6 ms, 600 shocks, modules

>50 kg 100 m/s

2

 (6 g), 11 ms, 600 shocks, chassis 

Packaged random vibration: 5 to 20 Hz @ 1.0 ASD w/–3dB/oct. from 20 to 
200 Hz
Packaged sinusoidal vibration: 5 to 62 Hz, 5 mm/s velocity, 62 to 200 Hz, 
0.2 G
Tilt: 22.5 degrees and return to position
14 drops minimum on sides & corners 
@ 39.4" <20 lb (9 kg) modules
@ 19.7" <80 lb (36 kg) chassis 

For the BlackDiamond 12804 switch

Typical configuration

3 power supplies

Full configuration

6 power supplies

Input

Nominal input: 100 to 240 V

, 60/50 Hz, 10 A max 

AC voltage input range: 90 to 264 V
Maximum input amperages: 

7 A @ 200 V

 (high-line)

10 A @ 90 V

 (low-line)

AC line frequency: 47 to 63 Hz
PS input socket: IEC 320 C14
Minimum wire size: 16 AWG (1.31mm

2

) copper stranded

Output

DC output: 48 V 

, 24 A/12 V 

, 4 A (high-line) 

48 V

, 13.5 A/12 V 

, 4 A (low-line) 

DC output power (W): 700 to 1200 W

Power supply cord selection

Refer to 

AC power supply input socket

IEC 320 C14 

Minimum wire size

16 AWG (1.0mm

2

) copper stranded

(pre-approved cord set for county of use)

Operating conditions

Operating temperature: 0° C to 40° C
Storage temperature: –40° C to 70° C
Operating humidity: 10% to 90% relative humidity, non-condensing
Operational shock: 30 m/s

2

 (3 g)