Sun Microsystems 5802 User Manual
72
Enterprise Fabric Suite 2007 User Guide • September 2008
Copying a Zone to a Zone Set
To copy an existing zone and its membership from one zone set to another, do the
following:
following:
1. In the faceplate display, open the Zoning menu and select Edit Zoning to open
the Edit Zoning dialog.
2. Choose one of the following:
■
In the zone set tree, select the zone to copy, and click the Copy button. Select
the zone set destination and click the Paste button.
the zone set destination and click the Paste button.
■
In the zone set tree, select the zone to copy, and drag it to the chosen zone set.
3. Click the Apply button to open the Save Zoning & Error Check dialog.
4. Click the Perform Error Check button to have the application check for zoning
conflicts, such as empty zones, aliases, or zone sets.
5. Click the Save Zoning button to implement the changes.
6. Click the Close button to close the Error Check dialog.
Adding Zone Members
You can zone a port/device by switch domain ID and port number, device port
Fibre Channel address, or the device port WWN. Adding a port/device to a zone
affects every zone set in which that zone is a member. To add ports/devices to a
zone, do the following:
Fibre Channel address, or the device port WWN. Adding a port/device to a zone
affects every zone set in which that zone is a member. To add ports/devices to a
zone, do the following:
1. Open the Zoning menu, and select Edit Zoning to open the Edit Zoning dialog.
2. Choose one of the following methods to add the port/device:
■
Select a port/device in the Port/Device tree, and drag it into the zone. To
select multiple ports/devices, press the Control key while selecting.
select multiple ports/devices, press the Control key while selecting.
■
Select a port/device in the Port/Device tree. To select multiple ports/devices,
press the Control key while selecting. Select a zone set in the left pane. Open
the Edit menu and select Add Members.
press the Control key while selecting. Select a zone set in the left pane. Open
the Edit menu and select Add Members.
■
Select a port/device in the Port/Device tree. To select multiple ports/devices,
press the Control key while selecting. Select a zone set in the left pane. Click
the Insert button.
press the Control key while selecting. Select a zone set in the left pane. Click
the Insert button.
If the port/device you want to add is not in the Port/Device tree, you can add it
by doing the following:
by doing the following:
a. Right-click the selected zone.
b. Open the Edit menu and select Create Members.