Sun Microsystems 5602 User Manual

A – Command Line Interface

Set Command

59097-01 A

A-59

0

Sets a variety of switch parameters.

Admin session for all keywords except Alarm, Beacon, and Pagebreak which are 
available without an Admin session.

alarm [option]
beacon [state]
config [option]
log [option]
pagebreak [state]
port [option]
setup [option]
switch [state]
timezone

alarm [option]
Controls the display of alarms in the session output stream or clears the alarm log. 
[option] can be one of the following:

clear
Clears the alarm log history. This value requires an Admin session.
on
Enables the display of alarms in the session output stream.
off
Disables the display of alarms in the session output stream.

beacon [state]
Enables or disables the flashing of the Logged-In LEDs according to [state]. This 
keyword does not require an admin session. [state] can be one of the following:

on
Enables the flashing beacon.
off
Disables the flashing beacon.

config [option]
Sets switch, port, port threshold alarm, security, and zoning configuration 
parameters. Refer to the 

.

log [option]
Specifies the type of entries to be entered in the event log. Refer to the 

.