Sun Microsystems 5602 User Manual

A – Command Line Interface

Zoneset Command

59097-01 A

A-131

0

Manages zone sets and component zones across the fabric.

Admin session and a Zoning Edit session. Refer to the 

 for information about starting a Zoning Edit session. The Active, List, 

and Zones keywords are available without an Admin session. You must close the 
Zoning Edit session before using the Activate and Deactivate keywords.

activate [zone_set]
active
add [zone_set] [zone_list]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deactivate
delete [zone_set]
list
remove [zone_set] [zone_list]
rename [zone_set_old] [zone_set_new]
zones [zone_set]

activate [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active 
zone set. Close the Zoning Edit session before using this keyword.
active
Displays the name of the active zone set. This keyword does not require Admin 
session.
add [zone_set] [zone_list]
Adds a list of zones and aliases given by [zone_list] to the zone set given by 
[zone_set]. Use a <space> to delimit zone and alias names in [zone_list].
copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the 
zones from the zone set given by [zone_set_source].
create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name must 
begin with a letter and be no longer than 64 characters. Valid characters are 0-9, 
A-Z, a-z, _, $, ^, and -. The zoning database supports a maximum of 256 zone 
sets.
deactivate
Deactivates the active zone set. Close the Zoning Edit session before using this 
keyword.
delete [zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the 
command is suspended until the zone set is deactivated.