Sony MKS-2010 User Manual
Ch
a
a
p
te
r
7
File
Op
er
at
io
ns
141
Operating on Individual Data Files
The popup window closes.
6
In the File >Load menu, press [Dest Register].
A list of destination registers appears in a popup
window.
window.
7
Do one of the following to select the destination
registers.
registers.
• Press directly on the list in the popup window.
• Use the arrow buttons to scroll the reverse video
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
8
When you are finished selecting registers, press [OK].
The popup window closes.
9
In the File >Load menu, press [Load].
A confirmation window appears asking if you want to
execute the load.
execute the load.
10
Press [Yes] in the confirmation window to execute the
load, or [No] to cancel it.
load, or [No] to cancel it.
If you pressed [Yes], the load begins and a window
opens to show its progress.
Note that all existing files in the destination registers
are deleted before the load begins.
opens to show its progress.
Note that all existing files in the destination registers
are deleted before the load begins.
To cancel a load after it has started
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the load has been cancelled.
Press [Cancel] in the progress window, and press [OK]
in the message box which appears to inform you that
the load has been cancelled.
Saving Data Files
You can save frame memory image data that has been
loaded into registers to files on the desired type of media
(hard disk or “Memory Stick”).
loaded into registers to files on the desired type of media
(hard disk or “Memory Stick”).
See the previous section “Loading Data Files” for more
information about how to load frame memory image data
files.
information about how to load frame memory image data
files.
1
From the top menu, select File >Save.
The Save menu appears.
The media, directory, files, and registers used in the
previous save operation appear in the status area.
previous save operation appear in the status area.
2
Select the Frame Memory category, and as required
the target media.
the target media.
For details about the procedure, see “Common
Operations – Selecting the Frame Memory Category
and the Target Media” (page 144).
Operations – Selecting the Frame Memory Category
and the Target Media” (page 144).
3
To change the save source registers, press [Source
Reg] in the File >Save menu.
Reg] in the File >Save menu.
A register list appears in a popup window.
4
Do one of the following to select the registers to save.
• Press directly on the list in the popup window.
• Use the arrow buttons to scroll the reverse video
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
5
When you are finished selecting registers, press [OK].
The popup window closes.
6
In the File >Save menu, press [Dest File].
A list of destination files appears in a popup window.
7
Do one of the following to select the destination files.
• Press directly on the list in the popup window.
• Use the arrow buttons to scroll the reverse video
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knobs.
Knob
Description
Setting values
1 (Start Reg) Number of first
destination register
1 and upwards
2 (Number)
Number of destination
registers
registers
1 and upwards
Knob
Description
Setting values
1 (Start Reg) Number of first register
to save
1 and upwards
2 (Number)
Number of registers to
save
save
1 and upwards
Knob
Description
Setting values
1 (Start File)
Number of first
destination file
destination file
1 and upwards