Sony MKS-2010 User Manual

156

Basic Settings

Ch
a

p

te

r 

9 

  Sys

te

m

 Set

tin
gs

• PGM (program signal): final output signal including 

the downstream key

• PST  (preset  signal)
• PGM Clean (program clean signal): final output 

signal excluding the downstream key

• DSK PVW (downstream key preview signal) or 

DSK Key Out (downstream key output signal): The 
display varies depending on the setting of [DSK 
PVW] in the Output Assign menu.

• AUX1 (auxiliary 1 signal) to AUX4
• EDIT PVW (edit preview signal)
• No Assign: no signal assigned.

Select the output signal to be assigned to the output 
port selected in step 2.

This makes the signal assignment.
To the right of the output port number selected in the 
status area of the Output Assign menu is shown the 
name of the assigned output signal.

Depending on the signal, the name shown in the popup 
window and the name shown in the status area of the 
Output Assign menu may be different.

By pressing the DSK PVW button in the downstream key/
fade to black control block, you can temporarily switch M/
E PVW output (1 M/E panel) or PST output (1.5 M/E 
panel) to DSK PVW output.

• This function is not available when [DSK PVW Btn] is 

set to Disable. Press [DSK PVW Btn] to set it to Enable.

• This function is not available when DSK Key Out is 

selected instead of DSK PVW.

Each cross-point button in the M/E cross-point control 
block, PGM/PSTcross-point control block (using a 1.5 M/
E panel or 1.5 M/E wide panel), and AUX bus control 
block has two numbers. Select which of these numbers is 

valid by toggling the dedicated [SHIFT] buttons above 
cross-point button rows on or off.

The dedicated [SHIFT] button does not light and does not 
function when you are using the rightmost buttons in the 
cross-point button rows (the 12th or 20th buttons) as 
[SHIFT] buttons.

In the M/E cross-point control block, PGM/PSTcross-
point control block (using a 1.5 M/E panel or 1.5 M/E wide 
panel), and AUX bus control block, the button numbers of 
the cross-point buttons are as shown in the following 
figure.
For the cross-point buttons in all control blocks, the same 
signal is assigned to the same button number. The numbers 
of all of these buttons differ depending on whether the 
dedicated [SHIFT] button is on or off. The numbers also 
differ depending on whether the rightmost buttons in 
cross-point button rows are being used as [SHIFT] button 
(shift mode). See page 158 for more information about 
shift mode.

M/E Key PVW

M/E K-PVW

M/E Key Out

M/E Key

M/E PGM Clean

M/E PGM CLN

PGM Clean

PGM CLN

DSK Key Out

DSK Key