Sony 9000 User Manual

151

Setup

  Cha

p

te

r 1 

D

V

S-90

00 F

unc

tions

– Recall mode
– Automatically turning off the [EDIT ENBL] button when an effect is 

recalled

– Automatic insertion of a first keyframe when an empty register is 

recalled

– Effect Auto Save
– Default KF Duration
– Setting whether or not to replay the first keyframe after rewinding a GPI/

P-BUS/DDR/VTR effect

• Source/Dest Name: For the Source/Dest (source/destination) names used by 

the system, select one of the following:

– Source name set by cross-point assignment or fixed bus name
– Description name set on routing switcher
– “Type + No.” name set on routing switcher

• Name Display: Specify the number of characters for display of the names 

selected in Source/Dest Name above, as two characters, four characters, or 
Auto.

• Flexi Pad: Carry out Flexi Pad settings. Specify the delegation selection 

coupling, and display mode for the LCD buttons.

• Custom Button: Set the following button operation modes.

– [ALL] button for next transition selection
– [AUTO TRANS], [TAKE] or [FTB] button during auto transition 

execution

– [RUN] button during keyframe execution
– [UTIL] button
– [TRANS PVW] button
– [XPT HOLD] button in key rows

• Sensitivity: Adjust trackball, joystick and double-click sensitivity.
• Main Split Fader: When the split fader is active, specify whether the fader 

to control other than mix is the left side or the right side.

• Screen Saver: Make the menu screen saver settings.
• LCD Brightness: Adjust the LCD brightness.
• LED Brightness: Adjust the LED brightness.
• Switch Brightness: Adjust the switch brightness.
• Touch Beep: Select whether or not to sound a beep when a menu operation 

is carried out.

• Touch Panel Calibration: Calibrate the touch panel.

In switcher setup, make settings particular to the switcher processor.