Sony 9000 User Manual
Chap
te
r
3
T
rans
it
ion
s
s
246
Executing a Transition
• When a transition applies to a combination of more than one of the
background and keys 1, 2, 3, and 4, then the transition for all of these must
be in the same direction complying with the above table.
be in the same direction complying with the above table.
• If as a result of an auto transition, for example, the fader lever position does
not agree with the signal output, this is a non-sync state (see page 244) and
LEDs light at both end positions of the fader lever travel. Moving the fader
lever does not carry out a transition, but when the fader lever reaches the end
position the non-sync state is released, and it is now possible to carry out the
next transition. If the fader lever is moved in the direction away from the lit
LEDs, this carries out the next transition, over the remaining part of the fader
lever travel.
LEDs light at both end positions of the fader lever travel. Moving the fader
lever does not carry out a transition, but when the fader lever reaches the end
position the non-sync state is released, and it is now possible to carry out the
next transition. If the fader lever is moved in the direction away from the lit
LEDs, this carries out the next transition, over the remaining part of the fader
lever travel.
Wipe direction in bus fixed mode
The direction of a wipe is also in a fixed relationship to the fader lever
movement direction.
movement direction.
Keys 1, 2, 3, and 4
On
t
Off (deletion)
Downward
Off
t
On (insertion)
Upward
Next transition
Transition direction
Fader lever movement
Transition type
Wipe direction
Fader lever movement
Wipe
Normal
Upward
Reverse
Downward