Sony 9000 User Manual
293
Key Setting Operations With the Key Control Block
Chapt
er
4
K
e
y
s
Setting the outline parameters
When the [OUTLINE] button is lit green, the parameter settings depend on the
key type and whether the separate edge function is active. To activate the
separate edge function, press [Separate Edge], setting it on, in the Edge menu
for the key.
key type and whether the separate edge function is active. To activate the
separate edge function, press [Separate Edge], setting it on, in the Edge menu
for the key.
• Separate edge off
a) In the “4H mode” and when [Fine Key] (page 276) is on, the setting value range is 0 to 4.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The outline width settings can be made independently for left, right, top, and
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
a) In the “4H mode” and when [Fine Key] (page 276) is on, the setting value range is 0 to 4.
When [Outline] is selected with separate edge on, the [MORE] button lights
amber. Pressing the [MORE] button to turn it green then allows you to adjust
the key fill density parameter with a knob.
amber. Pressing the [MORE] button to turn it green then allows you to adjust
the key fill density parameter with a knob.
Setting the embossing parameters
When the [EMBOS] button is lit green, adjust the following parameters.
4
Density
Density
0 to 100
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Width
Outline width
0 to 8
a)
(0 to 100)
b)
4
Density
Outline density
0 to 100
Knob
Parameter
Adjustment
Setting values
1
Top
Top edge width
0 to 8
a)
2
Left
Left edge width
0 to 8
a)
3
Right
Right edge width
0 to 8
a)
4
Bottom
Bottom edge width
0 to 8
a)
Knob
Parameter
Adjustment
Setting values
4
Density
Outline density
0 to 100
Knob
Parameter
Setting values
1
Width
0 to 4