Sony MVS8000 User Manual
557
Video Process Settings
Chap
Video Process Settings
This section describes operations on the M/E-1 to M/E-3, and PGM/PST
background A and B buses, and utility buses 1 and 2.
For these operations, use the Misc >Video Process menu in the respective
operating bank.
background A and B buses, and utility buses 1 and 2.
For these operations, use the Misc >Video Process menu in the respective
operating bank.
For video process settings on other buses, see the following.
• Settings for a particular input signal: “Signal input settings” in Chapter 16
• Settings for a particular input signal: “Signal input settings” in Chapter 16
(Volume 2)
• Key fill bus settings: “Video Processing” (page 405)
• Settings for frame memory source buses 1 and 2: “Setting video processing”
• Settings for frame memory source buses 1 and 2: “Setting video processing”
• Settings for Aux 1 to 48 buses: “Making video process settings for an AUX
• Overview of video process: “Video Process” (page 107)
This section describes an example on the background A bus of the M/E-1 bank.
For the background B bus or utility bus 1 or 2, make the adjustment with a
similar procedure.
For the background B bus or utility bus 1 or 2, make the adjustment with a
similar procedure.
Making video process settings for each bus
1
In the menu control block, press the top menu selection button [M/E1] and
select VF7 ‘Misc’ and HF2 ‘Video Process.’
select VF7 ‘Misc’ and HF2 ‘Video Process.’
2
In the <Bkgd-A> group, press [Video Process], turning it on.
3
Adjust the following parameters.
To return the parameter settings to the defaults
Press [Unity] in the <Bkgd-A> group.
Press [Unity] in the <Bkgd-A> group.
Knob
Parameter
Adjustment
Setting values
1
Video Gain
Video signal gain
–200.00 to +200.00
2
Y Gain
Luminance signal gain
–200.00 to +200.00
3
C Gain
Chrominance signal gain
–200.00 to +200.00
4
Hue Delay
Hue delay
–180.00 to +180.00
5
Black Level
Black level
–7.31 to +109.59