Sony DVS-9000-C User Manual
1-6
DVS-9000/9000SF
1-4-2. Installing the Connector Board
1.
Remove the two screws and remove the blank panel.
m
. To install the connector board into the slot in which
m
. To install the connector board into the slot in which
the other board is installed already, loosen the two
fixing screws and remove the connector board that is
installed already.
fixing screws and remove the connector board that is
installed already.
. Store the removed blank panel in a safe place.
Blank panel
B3
x 5
B3
x 5
5.
While closing the eject levers in the direction of arrow
1, push in the plug-in board.
1, push in the plug-in board.
6.
Attach the plug-in board loose-proof assembly and the
front panel by reversing the installation steps of 2, 3.
front panel by reversing the installation steps of 2, 3.
DVS-9000 option
Name of option
Name of board
Slot on the front side
BKDS-9160
OUT-26 board
16
BKDS-9210
MIX-46 board
6, 7
DVS-9000SF option
Name of option
Name of board
Slot on the front side
BKDS-9210
MIX-46 board
6
Eject lever
Eject lever
1
1
1-4. Installing the Options
(The illustration shows the DVS-9000.)
(The illustration shows the DVS-9000.)