Sony 4-296-436-11 (2) User Manual
II-11
Setting Wipes
Cha
p
te
r 2
V
ideo
S
witc
h
in
g
Selecting the Pattern and Direction
for Wipes
for Wipes
A wipe can be set to proceed in either the normal wipe
direction (normal) or reverse wipe direction (reverse). You
can also specify normal and reverse to be switched each
time a transition finishes (normal/reverse).
direction (normal) or reverse wipe direction (reverse). You
can also specify normal and reverse to be switched each
time a transition finishes (normal/reverse).
Selecting the wipe pattern
You can select the wipe pattern using one of the following
three methods.
• Select from the patterns assigned to the numeric buttons
three methods.
• Select from the patterns assigned to the numeric buttons
(direct selection).
For details, see “Selecting Effects with the Numeric Keypad (Direct
Selection)” (
c Basic Operation)
• Enter the pattern number with the numeric buttons.
For details, see “Specifying effects by pattern number” (
c Basic
Operation).
• Specify the pattern number in the [Effect] menu.
Specifying the pattern number in the
[Effect] menu
[Effect] menu
Settings menu: [Wipe Adjust] (page II-15)
For details on the wipe pattern numbers, see “Effect Pattern List” (
c Basic
Operation).
Making Detailed Adjustments to
Wipe Patterns
Wipe Patterns
You can set the position of a wipe pattern and apply
various variations and modifiers in the [Wipe Modify]
menu.
various variations and modifiers in the [Wipe Modify]
menu.
To display the [Wipe Modify] menu
Display the [Effect] menu, turn the V1 knob to select
[Wipe Adjust], and press this knob.
Display the [Effect] menu, turn the V1 knob to select
[Wipe Adjust], and press this knob.
Setting the wipe position
The wipe position can be set in the [Wipe Modify] menu
or with the X-Y pointer in the menu control block.
or with the X-Y pointer in the menu control block.
Settings menu: [Wipe Modify] menu > [Positioner]
(page II-16), [Positioner Adjust] (page II-16)
To set the position with the X-Y pointer
Press the POS button in the menu control block so that it
lights up and then adjust the position by controlling the
X-Y pointer.
Press the POS button in the menu control block so that it
lights up and then adjust the position by controlling the
X-Y pointer.
Setting the rotation method of a wipe
pattern
pattern
You can select from the following three rotation methods
for wipe patterns.
for wipe patterns.
Angle
Performs the wipe with the pattern inclined at a fixed
angle.
Performs the wipe with the pattern inclined at a fixed
angle.
Speed
Rotates the pattern at a fixed speed during the transition.
Rotates the pattern at a fixed speed during the transition.
Magnitude
Rotates the pattern at only the set angle for one transition.
Rotates the pattern at only the set angle for one transition.
Settings menu: [Wipe Modify] menu > [Rotation]
(page II-17), [Rotation Adjust] (page II-17)
Normal
Reverse
Positioner Off
Positioner On
Angle Off
Angle On