Sony 4-296-436-11 (2) User Manual

II-38

Importing and Exporting Snapshots

  Chap

ter
 5

  I

m

por

ti

ng and

 E

x

p

o

rt

in

g F

iles

Insert the USB flash drive that stores the configuration 
data you want to restore into the USB connector of the 
unit.

Display the [File] menu, turn the V1 knob to select 
[Import Config], and press this knob.

The data in the USB flash drive is read and the 
configuration data that can be imported is displayed.

Turn the V1 knob to select the configuration data to 
import, and press the V4 knob to start importing.

When importing is complete, a message prompting 
you to restart the unit appears.

Press the V3 knob (OK), and then turn off the unit and 
turn it on again.

When you import configuration data, the startup mode 
will automatically change to [User].

You can export the snapshots stored in the unit to a USB 
flash drive, and import the snapshots stored in the USB 
flash drive to the unit.

Snapshots cannot be imported or exported in 3D mode.

Insert the USB flash drive into the USB connector of 
the unit.

Display the [File] menu and turn the V1 knob to select 
[Export Snapshot], turn each knob to specify the files 
to export, and press the V4 knob to start exporting.

When the V4 knob is pressed, the specified number of 
snapshots are exported.

The folder to which the files are exported and the file 
names are as shown below.
Folder name: \Sony\MCS\SNAPSHOT
File name: YYMMDD-HHMMSS-##.SSS

(## is the snapshot number [01 to 20])

When exporting snapshots, make sure that the number 
of files in the folder does not exceed 99.

V2

Source

Number of first 
snapshot to export

SS1 to SS20

V3

Num

Number of 
snapshots to export

1 to 20