Sony MKS-2017 User Manual
Cha
p
te
r 6
Ad
Ad
v
a
nce
d Op
er
a
tio
ns
114
Color Correction
To return primary color correction parameters to
their default settings
Press [Unity].
their default settings
Press [Unity].
To mask part of the primary color
correction
correction
Note
The mask function is common to the following color
correction functions.
• Primary color correction
• Secondary color correction
• Luminance processing
• Spot color adjustment
For example, if in primary color correction you set mask 1
to a box, then in secondary color correction set mask 1 to
a pattern, this also changes the setting in primary color
correction to the pattern.
correction functions.
• Primary color correction
• Secondary color correction
• Luminance processing
• Spot color adjustment
For example, if in primary color correction you set mask 1
to a box, then in secondary color correction set mask 1 to
a pattern, this also changes the setting in primary color
correction to the pattern.
Here the procedure for mask 1 operation is described by
way of example. You can carry out mask 2 operation in a
similar way.
way of example. You can carry out mask 2 operation in a
similar way.
1
Press [Mask] in the Primary menu.
A popup window appears.
2
Press [Mask 1] to apply a mask.
3
Press the 3rd menu title button from the top.
A popup window (see page 111) appears.
4
Press [Mask 1].
The Mask 1 menu appeas.
Note that the mask menu 1 can also be accessed from
the CCR >CCR1 menu.
Note that the mask menu 1 can also be accessed from
the CCR >CCR1 menu.
5
Set the mask source and mask pattern transformation
method.
method.
For details about operation, refer to “Setting Key
Mask Shapes and Positions” (page 109).
Mask Shapes and Positions” (page 109).
6
Referring to “CCR Menu” (page 111), open the
Primary menu.
Primary menu.
7
Press [Mask] and adjust the following parameters.
When Box was selected as the mask source:
When Pattern was selected as the mask source:
To invert the mask source
Press [Mask Invert] in the Primary menu.
Press [Mask Invert] in the Primary menu.
Secondary Color Correction
You can adjust the following across a ±30° range around
the center point of the color, for each of six colors (red,
green, blue, yellow, cyan, and magenta).
• Luminance
• Saturation
• Hue delay
the center point of the color, for each of six colors (red,
green, blue, yellow, cyan, and magenta).
• Luminance
• Saturation
• Hue delay
To execute secondary color correction
Display the Secondary menu, then proceed as follows.
4 (All)
Knee correction of R,
G, and B signals
(adjusted at once)
G, and B signals
(adjusted at once)
Red value is shown
Knob
Description
Setting values
Knob
Description
Setting values
1 (Left)
Left edge position
–100.00 to +100.00
2 (Right)
Right edge position –100.00 to +100.00
3 (Top)
Top edge position
–100.00 to +100.00
4 (Bottom)
Bottom edge
position
position
–100.00 to +100.00
5 (Soft)
Degree of softness
of box
of box
0.00 to 100.00
Knob
Description
Setting values
1 (H Position) Horizontal position
–200.00 to +200.00
2 (V Position) Vertical position
–200.00 to +200.00
3 (Size)
Pattern size
0.00 to 100.00
4 (Soft)
Degree of softness
of pattern edge
of pattern edge
0.00 to 100.00
5 (Pattern)
Pattern number
1 to 24