Sony MKS-2017 User Manual

Ch
ap
te

r 9
   Sys

tem Set

tings

187

Other Settings

Press [New], turning it on, then turn the knobs to set 
the following parameters.

Press [Set].

A new tally copy setting based on the settings made in 
step 2 is added.

If [New] is on, turn it off.

Using any of the following methods, select the setting 
to change.

• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video 

cursor.

• Turn the knob.

Turn the knobs to set the following parameters.

Press [Set].

Select a copy setting by carrying out steps 1 and 2 of 
“To modify tally copy settings,” then press [Sort].

A popup window appears.

Select one of the following to execute the sort.

From Source: Sort in ascending order (smallest first) 

by From Source name.

To Source: Sort in ascending order by To Source 

name.

To delete tally copy settings
Select a copy setting by carrying out steps 1 and 2 of “To 
modify tally copy settings,” then press [Delete].

To control external devices connected to the RS-422A 9-
pin serial ports of the DCU, use the Device menu to make 
port settings.

See “Controlling External Devices” (page 146) for more 
information about controlling external devices.

From the top menu, select Setup/Diag >Device >Port 
Assign.

The Port Assign menu appears. The status area shows 
a list of devices currently assigned to ports, together 
with information about how they are controlled.

Using any of the following methods, select the target 
port for a device assignment.

• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video 

cursor.

• Turn the knob.

1 (CP FR (FR)) Copy-from source 

start address

1 to 1024

2 (CP FR (To))

Copy-from source 
end address 

1 to 1024

3 (CP To (FR))

Copy-to source start 
address

1 to 1024

1 (No)

Copy setting selection

1 and upwards

2 (CP From)

Copy-from source

1 to 1024

3 (CP To)

Copy-to source

1 to 1024