Sony DVS-9000SF User Manual

2

For the customers in the USA
This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the 
FCC Rules.  These limits are designed to provide reasonable 
protection against harmful interference when the equipment is 
operated in a commercial environment.  This equipment 
generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio 
communications.  Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own 
expense.

You are cautioned that any changes or modifications not 
expressly approved in this manual could void your authority to 
operate this equipment.

The shielded interface cable recommended in this manual 
must be used with this equipment in order to comply with the 
limits for a digital device pursuant to Subpart B of Part 15 of 
FCC Rules.

This symbol is intended to alert the user to the 
presence of important operrating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

(BKDS-9160/9161/9162/9210/9470, MKS-8110SD/8111SD, 
HK-PSU04 only)
This device complies with part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) this device may 
not cause harmful interference, and (2) this device most 
accept any interference received, including interference that 
may cause undesired operation.

For customers in Canada (BKDS-9160/9161/9162/9210/
9470, MKS-8110SD/8111SD, HK-PSU04 only)
This Class A digital apparatus complies with Canadian ICES- 
003.

Pour les utilisateurs au Canada (BKDS-9160/9161/9162/
9210/9470, MKS-8110SD/8111SD, HK-PSU04 uniquement)
Cet appareil numérique de la classe A est conforme à la 
norme NMB-003 du Canada.

WARNING: THIS WARNING IS APPLICABLE FOR USA 
ONLY.

If used in USA, use the UL LISTED power cord specified 
below.
DO NOT USE ANY OTHER POWER CORD.

Plug Cap

Parallel blade with ground pin 
(NEMA 5-15P Configuration)

Cord

Type SJT, three 18 AWG wires

Length

Less than 2.5 m (8 ft 3 in)

Rating

Minimum 10 A, 125 V

Using this unit at a voltage other than 120V may require the 
use of a different line cord or attachment plug, or both.  To 
reduce the risk of fire or electric shock, refer servicing to 
qualified service personnel.

WARNING: THIS WARNING IS APPLICABLE FOR OTHER 
COUNTRIES.

1. Use the approved Power Cord (3-core mains lead)/

Appliance Connector/Plug with earthing-contacts that 
conforms to the safety regulations of each country if 
applicable.

2. Use the Power Cord (3-core mains lead)/Appliance 

Connector/Plug conforming to the proper ratings (Voltage, 
Ampere).

If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please consult a qualified service 
personnel.