Sony SDT-S9000/BM User Manual
12
Interconnections
The SCSI bus allows connection of up to seven peripherals to the host
computer. Use a SCSI cable with a full-pitch connector.
computer. Use a SCSI cable with a full-pitch connector.
Precautions
• Switch off the host computer and peripherals before connecting the SCSI
• Switch off the host computer and peripherals before connecting the SCSI
cable.
• Make sure the SCSI connectors are pressed tightly together.
• If this unit is the last (or only) device on the SCSI bus, make sure to connect
• If this unit is the last (or only) device on the SCSI bus, make sure to connect
a SCSI bus terminator to the open connector.
• The total length of the SCSI cable(s) between the host computer and the last
device should be less than 6 meters.
*1
SCSI CONNECTOR
AC IN
SCSI ID
GND
*1
When using high-speed data transfer with the SDT-S9000/BM, it is recommended that total
length of the SCSI cable not exceed 3m.
length of the SCSI cable not exceed 3m.
Part 2. Preparation
AC power