Grizzly H8241 Leaflet

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL H8241

120V ON/OFF

PADDLE SWITCH

INSTRUCTIONS

WARNINg: NO PORTION OF THIS INSTRUCTION SHEET MAy bE REPRODUCED IN ANy SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLy INDUSTRIAL, INC.

#ts13813 printEd in ChinA

Figure 1. h8241 on/oFF paddle switch.

Introduction

the  Model  h8241  features  a  recessed  on  ( | )
button  that  can  be  disabled  with  a  padlock  and
a  large  oFF  paddle  used  for  fast  shut  off.  the
switch assembly will mount on a standard electri-
cal box, or over a 1" x 2" opening.

Specifications

rated hp ....................................................

⁄

rated Voltage .............................................. 120V
rated Current ................................................ 16A
padlock shaft size .........................................

⁄

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.