Sun Microsystems MDS 9222i User Manual

Page of 12
Cisco MDS 9222i Switch and 18/4-Port Module Hardware Release Notes
5
Cisco Storage Media Encryption
Cisco MDS 9000 Family Storage Media Encryption (SME) encrypts data at rest on
heterogeneous tape devices and virtual tape libraries. SME is completely integrated
with the Cisco MDS 9000 family of switches and Cisco Fabric Manager, enabling
highly available encryption services to be deployed and managed without rewiring
or reconfiguring SANs, or installing additional software.
A Cisco MDS 9000 SME license is required to enable SME on an MDS 9222i switch or
MSM-18/4 module. The SME license is self-contained in that no other licenses are
needed to run SME on an MDS 9222i switch or MSM-18/4 module. SME requires a
Fabric Manager server for configuration, but does not require a Fabric Manager
server license.
There are three types of SME licenses:
A license for enabling SME on an MSM-18/4 module contained within an MDS
95xx chassis
A license for enabling SME on an MSM-18/4 module contained within an MDS
92xx chassis
A license for enabling SME on an MDS 9222i switch.
See
for SME firmware requirements
and other firmware requirements for your configuration.
Supported Hardware
The MDS 9222i switch and MSM-18/4 module are compatible with the following
storage platforms, HBAs, and host server platforms. The list applies only to the MDS
9222i switch and MSM-18/4 module hardware. It does not apply to the Cisco SME
software specifically.
This section contains the following topics:
Supported Storage Platforms
The MDS 9222i switch and MSM-18/4 module are compatible with the following
storage platforms: