Grizzly H8243 Leaflet

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

Warning: no portion of this instrUCtion shEEt may bE rEprodUCEd in any shapE

or form WithoUt thE WrittEn approval of grizzly indUstrial, inC.

#ts13815 printEd in ChinA

figure 1. h8243 on/oFF paddle switch.

introduction

the Model h8243 features a recessed stArt
button that can be disabled with a padlock and a
large stop paddle that ensures fast shut off. the
switch assembly mounts on a standard electrical
box.

specifications

rated hp @ 120V ....................................... 2 hp
rated hp @ 240V ....................................... 3 hp
rated Voltage range ......................... 120V/240V
rated Current @ 125V ..................................35A
rated Current @ 250V ..................................20A
resistive rating .................................... 600V/15A
padlock shaft size .........................................

⁄

modEl h8243

120v/240v on/off

paddlE sWitCh

instrUCtions

to reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. it is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.