Hearth & Home Technologies WSK-MLT User Manual

7

•  Button Press: Turns on Climate Control

•  Button Press: Turns off Climate Control

This allows the pilot fl ame to stay lit when activated, a ben-
efi t of this is reduced condensation on the glass at start-up 
in colder climate conditions.

A switch on the control box allows for battery power under 
no-power conditions (see Figure 8). By controlling the 
power supply with this switch, the batteries are supplying 
power only when needed, thus extending battery life. The 
switch also provides a convenient means for switching to 
battery power should there be a loss of 110 VAC power to 
the control box.

•  In the event of a power failure, switch the battery 

operation switch to the “Battery ON” position.

•  The fi replace can now be turned on and off with the ON/ 

OFF rocker switch located near the gas valve.

•  The wall switch functions will not operate under battery 

power.

•  Under battery control the only available function is fl ame 

“On” and “Off” in the high position.

•  To maximize battery life, and to restore full function 

capability of the wall switch, fl ip switch to “OFF” position 
after 120 VAC power is restored.

•  Press the Up Arrow Button twice and Down Arrow Button 

once. The unit will send out 3 beeps and an indicator in 
the LCD panel will show that the child proof is on.

•  Press the Up Arrow Button twice and Down Arrow Button 

once. The unit will send out 3 beeps and the indicator in 
the LCD panel that shows that the child proof is on will 
disappear.

DESCRIPTION

SERVICE PART NO.

SOLENOID

HTI-17-006

WALL SWITCH/KEY PAD

HTI-12-007

CONTROL WIRE

HTII-23-007

COVER PLATE

HTI-21-007

CONTROL BOX

HTI-13-007

ACTUATOR PINS

HTI-17-116

SWITCH KIT

HTI-25-007

NOTE:  When in Child Proof Mode, only the arrow buttons 
will have functionality. Unit can enter Child Proof when the 
fi replace is on or off.