Freescale Semiconductor M9328MX21ADSE User Manual

Freescale Semiconductor

2-13

Figure 2-10 through Figure 2-12 show how to connect the ADS add-on modules. The following 
paragraphs describe how to connect and use the add-on modules.

P9

Ethernet

Standard Ethernet connector. A cable for direct network and one for 
crossover connections (direct to a PC) have been provided.

P10

Line In

Standard 3.5 mm connector for stereo audio input to the 
WM8731SEDS CODEC

P11

Microphone In

Standard 3.5 mm connector for a microphone. Use only dynamic 
microphones with a 200 to 600 ohms impedance.

P12

Headphone

Standard 3.5 mm connector for stereo audio. This is the amplified 
stereo output of the WM8731SEDS. Use headphones with a 16 to 32 
ohms impedance.

P13

TV encoder

This connector is used with P7 together to connect the TV encoder 
card.

PE1

Image Sensor 

Connect the image-sensor daughter board to this connector. 

PE2, PE3

Expansion 

Standard 48 pin, three row, male DIN connectors. Can be connected 
to directly or cabled to a custom circuit board.

PY1, PY2

CPU 

Connect the CPU module to these connectors.

PX1, PX2

Base board

Connect these to the Base board PY connectors. 

PK1, PK2

Option Cards

Connect an appropriate Option Card to these connectors

P20 (CPU)

Multi-ICE

Standard ARM Multi-ICE connector 

PM1, PM2 
(CPU)

NAND Flash

Plug the NAND Flash module into this connector.