Gefen ext-dvikvm-lan User Manual

page | 14

If the IP address(es) of a Sender and/or Receiver unit are not known, then use the following 

procedure to display the IP address of any Sender or Receiver unit on the network.

1.  Press and release the 

Switch button on the front panel of the Receiver unit. 

The current video channel will be displayed in the top-left corner of the screen. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the example, above, the current video channel is set to 0. 

2.  Change the video channel number by pressing and releasing the 

Switch button to 

advance to the next video channel.  Video channel numbers range from 0 to 255.  

Consecutively pressing the 

Switch button will cycle through all 256 channels.  

Press the 

Switch button

Operating the DVI KVM over IP

Basic Operation