Gefen ext-dvikvm-lan User Manual
page | 45
Chapter
Page Title
page | 45
Appendix
Upgrading the Firmware
The following items are required to upgrade the firmware:
•
Gefen DVI KVM over IP
•
Computer (Mac or PC)
•
Firmware files
1. Download the firmware for the DVI KVM over IP from the Gefen Web site.
go to page 47.
2. Extract both firmware files from the .ZIP file. The .ZIP file contains two files:
►
TX_host_kernel_A511_webfwh_v[version]d.bin
(Sender unit)
►
RX_client_kernel_A511_webfwc_v[version]d.bin (Receiver unit)
3. Access the Web interface by entering the IP address of the Sender or Receiver unit.
The order in which the Sender and Receiver units are upgraded does not matter.
Refer to
if necessary.
4. Under the
System tab, click the Update Firmware frame.
5. Click the
Browse... button and select the firmware for the unit that is being upgraded:
If upgrading the Sender unit, select the filename beginning with “TX”. If upgrading the
Receiver unit, select the filename beginning with “RX”.
6. Click the
Update button.
7. After a few moments, the Web interface will indicate that the upgrade process has
been started.