Avaya C460 User Manual
Chapter 2 Avaya C460 CLI Commands
16
Avaya C460 Reference Guide
The syntax for this command is:
[no] banner post-login
Example:
banner post-login line
clear arp-cache
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear arp-cache command to delete dynamic entries from the ARP
cache and the IP route cache.
cache and the IP route cache.
The syntax for this command is:
clear arp cache
[<vlan>|<ip addr>[<mask>]]
Example:
C460-1(super)# banner post-login
C460-1(super)#
vlan
VLAN string (up to 16 characters
ip addr
IP address
mask
IP mask
C460-1(configure)# clear arp-cache
Flushing all arp entries
Flushed 100 ARP entries
Done!