Avaya C460 SMON User Manual
Chapter 9
66
Avaya C460 SMON User Guide
•
The bottom portion of the Protocol Distribution window contains a
bar graph representing the following:
bar graph representing the following:
—
The Y axis represents the protocols selected to monitor in the
Protocol Directory dialog box (refer to
Protocol Directory dialog box (refer to
—
The X axis represents the rate of IP traffic through the device in
packets per second. Each bar represents the number of packets
per second for a specific protocol.
packets per second. Each bar represents the number of packets
per second for a specific protocol.
•
Checkboxes enable displaying packets or bandwidth in the bar
graph.
graph.
* Note: If the device stops responding, Protocol Distribution will
display the last data received until communication is restored.
Using the Protocol Directory
Using the Protocol Directory dialog box, you can view and configure the
protocols and specific TCP/UDP ports that an Avaya C460 router module
is monitoring. Based on the protocols and TCP/UDP ports selected in
Protocol Directory, you can use the Protocol Distribution tool to monitor
network traffic organized by protocol and TCP/UDP port number.
protocols and specific TCP/UDP ports that an Avaya C460 router module
is monitoring. Based on the protocols and TCP/UDP ports selected in
Protocol Directory, you can use the Protocol Distribution tool to monitor
network traffic organized by protocol and TCP/UDP port number.
This section contains the following topics:
•
- An overview of constant
and user defined protocols.
•
- An overview of how TCP/UDP port
numbers are used in Protocol Directory.
•
- Instructions on using the Protocol
Directory dialog box.