Avaya M770 User Manual

Chapter 10

Managing PNNI Routing

160

Avaya M770 ATM Switch User’s Guide

Set PNNI SVCC timers

Use the following command to set the PNNI node SVCC timers:

Note:

This request will set value for SVCC timers according to the index parameter.

Changes will take effect immediately.

PNNI Timers

Show PNNI node timers

Use the following command to show the PNNI node timers:

he user is not expected to change any of these timers. However, if you need more

information about these timers you may refer to the PNNI specification
(af-pnni-0055.000), Annex E: Architectural Variables.
The <level> parameter is optional – if it is omitted, timers of all levels will be
displayed.

Command:

M15-155s8:/>route pnni config svcc set <level> <index>

<value>

Parameters:

<level> - internal PNNI level number: 1 is the physical

node

<index> - the index of the timer, to set all timers type

'all'

<value> - the value that the selected timer will receive

Command:

M15-155s8:/>route pnni config timers show <level>

Examples:

Timers :

Name Index Current Default

Value Value Range Units

-----------------------------------------------------------------

PtseHoldDown 1 10 10 [ 1 - 600] 100ms

HelloHoldDown 2 10 10 [ 1 - 600] 100ms

HelloInterval 3 15 15 [ 1 - 600] secs

HelloInactivityFactor 4 5 5 [ 1 - 20] fctr

HlinkInactivityTime 5 120 120 [ 1 - 600] secs

PtseRefreshInterval 6 1800 1800 [ 60 - 3600] secs

PtseLifeTimeFactor 7 200 200 [100 - 500] %

RxmtInterval 8 5 5 [ 1 - 60] secs

RDelayedAckInterval 9 10 10 [ 1 - 600] 100ms

AvcrPm 10 50 50 [ 1 - 99] %

AvcrMt 11 3 3 [ 1 - 99] %

CdvPm 12 25 25 [ 1 - 99] %

CtdPm 13 50 50 [ 1 - 99] %