Avaya M770 User Manual

Chapter 14

Managing the LECS

190

Avaya M770 ATM Switch User’s Guide

If the M770 ATM Switch is looking for a remote LECS then it can be configured to 
use a LECS that is advertising one of the following addresses:
•

The WKA

•

A specific ATM address on the network.

•

The address of an elected M770 ATM Switch resilient LECS.

You can view the current location of the active LECS on the network. 

The output display from the following command will depend on the current 

location of the active LECS.

To view the location of the LECS, use the

lane lecs location

 

command:

Command:

M15-155s8:/>lane lecs location

• If the switch is using its own simple LECS then the following output will be 

displayed.

Output:

There is a local, simple LECS.

It is advertising the ATM Forum Well-Known Address.

Local LECS clients will use the local LECS.

• If the switch is using LECS redundancy and the local resilient LECS is on standby 

then the following output will be displayed.

Output:

The local resilient LECS is on standby.

It will advertise 

39.84.0F.80.01.BC.61.DF.00.24.24.24.00.24.24.24.24.24.24.30

The elected LECS is at NSAP 

39.84.0F.80.01.BC.61.DF.00.A4.A4.A4.00.A4.A4.A4.A4.A4.A4.30

• If the switch is looking for a remote LECS then the following output will be 

displayed.

Output:

There is no local LECS.

Local LECS clients will use the LECS at the ATM Forum well-known 

address.

• If the switch is looking for a remote elected resilient LECS then the following 

output will be displayed.

Output:

There is no local LECS.

Local LECS clients will use the elected resilient LECS.

The elected LECS is at the ATM Forum well-known address.