Avaya M770 User Manual
Chapter 14
Managing the LECS
194
Avaya M770 ATM Switch User’s Guide
Managing Resilient LECS Candidates
Note:
If you are not planning to use PNNI routing or want the M770 ATM Switch
switches in the third party environments to host a resilient LECS, contact Avaya
Technical Support. They can provide you with further information on what
configuration is required, depending on your third party switch, to get LECS
redundancy on your M770 ATM Switch switches.
Technical Support. They can provide you with further information on what
configuration is required, depending on your third party switch, to get LECS
redundancy on your M770 ATM Switch switches.
For information on when to create candidates in third party environments, see
Proprietary resilient LECS in Chapter 13, “LANE Services”.
Proprietary resilient LECS in Chapter 13, “LANE Services”.
Displaying a resilient LECS election candidate
To list all the resilient LECS candidates on the network that are known to the local
LECS, use the
LECS, use the
lane lecs resilient show
command:
Command:
M15-155s8:/>lane lecs resilient show
Output:
Mesh state is running, local LECS state is standby
Resilient LECS table
--------------------
Index
Election Protocol Endpoint AddressType
0)
39.84.0F.80.01.BC.61.DF.00.07.80.20.00.00.00.6F.07.80.20.7FPVC
1)
39.84.0F.80.01.BC.61.DF.00.07.20.9C.00.00.00.6F.07.20.9C.7FLOCAL
Index
LECS Address
0)
47.00.70.00.00.00.00.00.00.00.00.00.00.00.A0.3E.00.00.01.00
1)
47.00.70.00.00.00.00.00.00.00.00.00.00.00.A0.3E.00.00.01.00
Index
Status
Link StatePriorityChecksumUptime
0)
standby
reachable0
8570:00:00
1
)
active
reachable12885714 days, 8:28:29