Avaya M770 User Manual

Chapter 17

Managing System Commands

Avaya M770 ATM Switch User’s Guide

235

To set the linewrap, use the

terminal linewrap

 

command.

To display the current system prompt, use the

terminal prompt

 

command. 

To change the system prompt, use the

terminal prompt

 

command. 

The only value that should be changed is the prefix (e.g. M770). The sX 

(X=current slot number) should not be written as a system prompt.

Command:

M15-155s8:/>terminal linewrap {none | pager | terminal}

Example:

M15-155s8:/>terminal linewrap pager

Parameter:

none

The line wrapping is carried out by the terminal. The M770 
ATM Switch will not try to calculate how many lines have 
actually been used on the terminal. In fact, it will assume that 
no wrapping has occurred when performing pager functions.

pager

When the line output by the M770 ATM Switch reaches the 
defined terminal length, the M770 ATM Switch will insert a 
line break and assume that no line wrapping is carried out by 
the terminal.

terminal

The line wrapping is carried out by the terminal. The M770 
ATM Switch will keep a record of the number of lines (using 
the terminal width).

Command:

M15-155s8:/>terminal prompt

Output:

prompt is “M15-155s8”

Example:

M15-155s8:/>terminal prompt Caj770

Output:

Caj770s8:/>