Avaya M770 User Manual
Appendix B
Using BOOT Loader
286
Avaya M770 ATM Switch User’s Guide
Setting the wordwrap
To set the wordwrap, use the
wordwrap
command.
Viewing the linewrap status
For more information about the different linewrap settings, see Setting the linewrap
later in this chapter.
To display the linewrap status, use the
later in this chapter.
To display the linewrap status, use the
terminal linewrap
command.
Setting the linewrap
To set the linewrap, use the
terminal linewrap
command.
Viewing the pager status
To display the pager status, use the
terminal pager
command.
Enabling the pager
To enable the pager, use the
terminal pager enable
command.
Command:
M15-155s8:/>terminal wordwrap [on | enable | off | disable]
Example:
M15-155s8:/>terminal wordwrap enable
Command:
M15-155s8:/>terminal linewrap
Output:
no linewrapping
Command:
M15-155s8:/>terminal linewrap {none | pager | terminal}
Example:
M15-155s8:/>terminal linewrap pager
Parameters:
none
Line wrapping is carried out by the terminal.
The M770 ATM Switch will not try to calculate how many lines
have actually been used on the terminal. In fact, it will assume that
no wrapping has occurred when performing pager functions.
The M770 ATM Switch will not try to calculate how many lines
have actually been used on the terminal. In fact, it will assume that
no wrapping has occurred when performing pager functions.
pager
When the line output by the M770 ATM Switch reaches the
defined terminal length, the M770 ATM Switch will insert a line
break and assume that no line wrapping is carried out by the
terminal.
defined terminal length, the M770 ATM Switch will insert a line
break and assume that no line wrapping is carried out by the
terminal.
terminal
Line wrapping is carried out by the terminal.
The M770 ATM Switch will keep a record of the number of lines
(using the terminal width).
The M770 ATM Switch will keep a record of the number of lines
(using the terminal width).
Command:
M15-155s8:/>terminal pager
Output:
pager is enabled
Command:
M15-155s8:/>terminal pager enable
Output:
pager enabled