Avaya 2520-24-POE User Manual
TMA; Reviewed:
SPOC 11/16/2009
SPOC 11/16/2009
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
2 of 10
ProC2520-24PoE
1. Introduction
Power over Ethernet (PoE) allows both power and data to be simultaneously carried over
standard Ethernet cables. PoE-enabled Ethernet switches can supply power directly to Ethernet
devices, thereby simplifying installation and removing the need for separate power supplies for
those devices. The IEEE 802.3af standard defines the mechanisms for Power Sourcing
Equipment (PSE), such as PoE-enabled Ethernet switches, to detect, classify, and supply power
to Powered Devices (PDs), such as PoE-enabled IP telephones. In the compliance-tested
configuration described in these Application Notes, the HP ProCurve 2520-24-PoE Switch was
configured to supply inline PoE to Avaya PDs. The ProCurve 2520-24-PoE Series Switch
supports the IEEE 802.3af PoE standard as well as the upcoming draft IEEE 802.3at standard for
Power over Ethernet Plus (PoE+) , which can provide up to 30 W per port.
standard Ethernet cables. PoE-enabled Ethernet switches can supply power directly to Ethernet
devices, thereby simplifying installation and removing the need for separate power supplies for
those devices. The IEEE 802.3af standard defines the mechanisms for Power Sourcing
Equipment (PSE), such as PoE-enabled Ethernet switches, to detect, classify, and supply power
to Powered Devices (PDs), such as PoE-enabled IP telephones. In the compliance-tested
configuration described in these Application Notes, the HP ProCurve 2520-24-PoE Switch was
configured to supply inline PoE to Avaya PDs. The ProCurve 2520-24-PoE Series Switch
supports the IEEE 802.3af PoE standard as well as the upcoming draft IEEE 802.3at standard for
Power over Ethernet Plus (PoE+) , which can provide up to 30 W per port.
1.1. Interoperability Compliance Testing
The interoperability testing focused on verifying PoE interoperability with the ProCurve 2520-
24-PoE Switch and Avaya IP Telephones.
24-PoE Switch and Avaya IP Telephones.
The power tests included verification of the following after each powered device was connected
to the switch:
to the switch:
Successful boot operation.
Connecting a mix of Avaya IP Telephones to the switch, power cycling the switch and
verifying successful boot operation of the PDs and registration of the telephones.
1.2. Support
For technical support on ProCurve products, consult the support pages at:
2. Reference Configuration
As illustrated in Figure 1, the Avaya PDs covered in these Application Notes include the
following:
following:
Avaya 9600 Series IP Telephones
Avaya 5600 Series IP Telephones
Avaya 5600 Series IP Telephones
Avaya 1600 Series IP Telephones
For compliance testing, the Avaya 1600/9600 Series IP Telephones registered to Avaya Aura
TM
Communication Manager and the Avaya 5600 Series IP Telephones registered to Avaya IP
Office.
See Table 1 for a detailed list of specific models tested:
Office.
See Table 1 for a detailed list of specific models tested: