Avaya 2520-24-POE User Manual

TMA; Reviewed:
SPOC 11/16/2009

Solution & Interoperability Test Lab Application Notes

7 of 10

ProC2520-24PoE

7. Verification Steps

The following steps may be used to verify the configuration of PoE related parameters:

 Verify that the PoE Operational Status in ON at the system level by entering the

command show power-over-ethernet.

ProCurve Switch 2520-24-PoE# show power-over-ethernet

Status and Counters - System Power Status

  Pre-standard Detect : On
  Operational Status : On
  Usage Threshold (%) : 80

Chassis power-over-ethernet:

  Total Available Power : 195 W
  Total used Power : 5 W +/- 6W
  Total Remaining Power : 190 W

 Verify that Power Enable is Yes at the port level by entering the command show power-

management brief.

ProCurve Switch 2520-24-PoE# show power-over-ethernet brief

Status and Counters - Port Power Status

  PoE | Power Power Alloc Alloc Actual Configured Detection Power
  Port | Enable Priority By Power  Power Type Status Class
  ----- + ------- --------- ----- ------ ------ ----------- ----------- ------
  1 | Yes low usage 17 W   0.0 W Delivering 0
  2 | Yes low usage 17 W 0.0 W Searching 0
  3 | Yes low usage 17 W 0.0 W Searching 0
  4 | Yes low usage 17 W 0.0 W Searching 0
  5 | Yes low usage 17 W 0.0 W Searching 0
  6 | Yes low    usage 17 W 0.0 W Searching 0
  7 | Yes low usage 17 W 0.0 W Searching 0
  8 | Yes low usage 17 W 0.0 W Searching 0
  9 | Yes low usage 17 W 0.0 W    Searching 0
  10 | Yes low usage 17 W 0.0 W Searching 0
  11 | Yes low usage 17 W 0.0 W Searching 0
  12 | Yes low usage 17 W 0.0 W Searching 0