Lindy 39401 User Manual

User Manual 

 
An explanation of the customization settings is given in the table, below: 
 

 

 
 

Uploads 

After obtaining new versions of the firmware, specify the directories that you 
have put them in here to start the firmware upgrade procedure (see p. 23 for 
details). 

Time out Control 

If the CPU IP ACCESS SWITCH doesn’t receive any input from the computer 
that currently has access to it for the amount of time specified here, it ends 
the connection so it can be available for other users. 

Login failure 

Login failures allowed, sets the number of consecutive failed login attempts 
that are permitted from a remote computer. Login failure timeout, sets the 
amount of time a remote computer must wait before attempting to login again 
after it has exceeded the number of allowed failures 

Working Modes 

If Stealth Mode is enabled, the CPU IP ACCESS SWITCH cannot be pinged. 
 
If Echo Mode is disabled, the CPU IP ACCESS SWITCH will not show up in 
the list of local CPU IP ACCESS SWITCH units (see p. 11 and p. 27) 

Reset on exit 

Placing a check here causes the CPU IP ACCESS SWITCH to reset itself and 
implement all the new changes when you Click OK and close the Settings 
Notebook. Otherwise settings changes will not take effect until the CPU IP 
ACCESS SWITCH is manually reset.