Lindy LF1TBELRG User Manual

L1 - CPU Switch Smart only locks on to active ports during autoscanning (default) 

L2 - CPU Switch Smart locks on to every port in turn during autoscanning 

L3 - CPU Switch powers on in autoscan mode and locks on to active ports only 

L4 - CPU Switch Smart powers on in autoscan mode and locks on to all ports 

 

T1 - 2 seconds autoscan delay time before switching to next port (default) 

T2 - 5 seconds autoscan delay time before switching to next port 

T3 - 7 seconds autoscan delay time before switching to next port 

T4 - 10 seconds autoscan delay time before switching to next port 

T5 - 15 seconds autoscan delay time before switching to next port 

T6 - 20 seconds autoscan delay time before switching to next port 

T7 - 30 seconds autoscan delay time before switching to next port 

T8 - 60 seconds autoscan delay time before switching to next port 

 

Note: Autoscan mode is ended simply by selecting a fixed channel using the 

keypad, the keyboard hotkeys or the mouse. 

 

 

 

A three button PS/2 mouse or an IntelliMouse can be used to switch channels on the 

LINDY CPU Switch Smart. To switch to the next channel, the user simply holds 

down the central button or wheel button and presses the left or right hand button to 

change the channel (see section 3.5). If the user does not wish to take advantage of 

this feature, it can be disabled by selecting U2, U3 or U5. If the third button is being 

used to switch the LINDY CPU Switch Smart then it is not available for use with PC 

software although the function of an IntelliMouse wheel is not affected. 

Consequently in modes U1, U2 and U4 the LINDY CPU Switch Smart reports to the 

PCs that a 2 button mouse is connected. If you wish to use the full function of a 3 

button mouse or IntelliMouse for your PC software then you should select options 

U3 or U5.