Asante Technologies 8000 User Manual
Installation and Setup
Page 2-6
3
Connect the Stack Matrix module on the first switch to
the Stack Connector modules on the other switches. Use
the 50-pin stacking cables provided by Asanté, as shown
in Figure 2-1.
K Note: Do not use any cable but the IntraCore 8000
the Stack Connector modules on the other switches. Use
the 50-pin stacking cables provided by Asanté, as shown
in Figure 2-1.
K Note: Do not use any cable but the IntraCore 8000
stacking cable supplied with your unit. If you need
additional cables, contact Asanté support (see Appen-
dix A, “Technical Support,” for details).
additional cables, contact Asanté support (see Appen-
dix A, “Technical Support,” for details).
Figure 2-1 Four stack configuration
When you have cabled the switches together, proceed with network cabling,
as described in “Connecting to the Network” earlier in this chapter.
as described in “Connecting to the Network” earlier in this chapter.