Lindy 16 & 24 Leaflet

 
 
 
 
 
 

 

English  

 
 

 

 

 

 
 

LINDY No. 25009, 25017 

 

 
 

 
Thank you for purchasing the LINDY Fast Ethernet NWAY 
Switch. This high performance network switch is ideal for small 
networks or for segmenting larger networks into smaller, 
connected subnets for improved performance.  
 
All of its ports are capable of 10/100Mbps auto-negotiation, while 
the 10/100Mbps auto-sensing ability provides the easiest, most 
hassle-free way to integrate older 10Base-T network devices. 
 
This switch delivers a dedicated 10 or 100Mbps connection to 
every attached client with no bandwidth congestion issues. It 
also supports an auto MDI/MDI-X function - each port can be 
used to connect to any other Ethernet device without the need 
for crossover cables!  
 
Store-and-forward architecture is used by the switch to filter and 
forward data after each packet is received and examined to be 
free of errors. All of the ports support full and half-duplex 
operation which doubles the network bandwidth and allows the 
simultaneous transmission and reception of frames without 
causing collisions.  
 
The ‘Plug & Play’ switch requires no special software to 
configure and is fully compliant with the 10Base-T specifications 
of the IEEE802.3 Standard and with 100Base-TX specifications 
of the IEEE802.3u Standard. Diagnostic LEDs on the front panel 
show the operating status of both the switch and the individual 
ports.  

 
 

 

 

ƒ 

16 or 24 Port 10/100Mbps Fast Ethernet NWAY Switch  

ƒ 

1 x power cable 

ƒ 

19” Rack mount brackets with screws, rubber feet 

ƒ 

This manual 

 

 

ƒ 

Standards: IEEE 802.3 10Base-T, 802.3u 100Base-TX, 
IEEE 802.3x Flow Control 

ƒ 

Ports: 16 or 24 x RJ-45 10/100Mbps Fast Ethernet 

ƒ 

Auto MDI/MDI-X (Auto crossover) 

ƒ 

Network speed: 10/100/Mbps & Full/Half-duplex mode auto 
detection  

ƒ 

Switching Architecture: Store and Forward 

ƒ 

MAC Address: 8K 

ƒ 

Buffer Memory: 160KB 

ƒ 

NWAY Auto-negotiation: All ports 

ƒ 

Dimensions: 441 x 130 x 44mm (WxDxH) 24 Port model 

ƒ 

Dimensions: 441 x 161 x 44mm (WxDxH) 16 Port model 

ƒ 

Power Supply: internal 3.3V, 4A (100 ~ 240V AC, 50 ~ 60 
Hz, external)  

ƒ 

Operating Temperature: 0-40°C 

ƒ 

Operating Humidity: 10-90% (Non-condensing) 

ƒ 

For indoor use only