Lindy 25030 User Manual
- 19 -
2.4.5.3 State Activity
Active (selected): The port automatically sends LACP protocol packets.
N/A (not selected): The port does not automatically send LACP protocol packets,
and responds only if it receives an LACP protocol packet from a remote device.
NOTE: Work Ports defined, as LACP enabled in the ‘Aggregator Settings’ page will
automatically have their LACP Activity State enabled.
N/A (not selected): The port does not automatically send LACP protocol packets,
and responds only if it receives an LACP protocol packet from a remote device.
NOTE: Work Ports defined, as LACP enabled in the ‘Aggregator Settings’ page will
automatically have their LACP Activity State enabled.
2.4.6 Filter Database
2.4.6.1 IGMP Snooping
The
24 + 2 Giga SNMP Ethernet Switch
supports IP multicasting via the IGMP
protocol. Administrators can enable IGMP within the web management’s “Forwarding
and Filtering” page, then display the IGMP snooping information. Multicast groups,
VID and member port information.
IP multicast addresses range from 224.0.0.0 through to 239.255.255.255.
and Filtering” page, then display the IGMP snooping information. Multicast groups,
VID and member port information.
IP multicast addresses range from 224.0.0.0 through to 239.255.255.255.