Lindy 25030 User Manual
- 8 -
1.3.3 Telnet management
In addition to local terminal mode operation, the
24 + 2 Giga SNMP Ethernet Switch
supports remote management through Telnet, over the Ethernet LAN network or
even over Internet. In this mode, the user needs to perform the same initial IP setup
on the switch as previously discussed. (Refer: ‘Modify Switch’s IP address via Out-of-
Band method’)
even over Internet. In this mode, the user needs to perform the same initial IP setup
on the switch as previously discussed. (Refer: ‘Modify Switch’s IP address via Out-of-
Band method’)
Telnet IP Address of Switch
The following dialogue appears within the Telnet Window. Once again enter the
username and password to continue. To find out more about configuring the Switch
in this mode, please refer the instructions in chapter 3 of this manual
username and password to continue. To find out more about configuring the Switch
in this mode, please refer the instructions in chapter 3 of this manual
.