Brocade Communications Systems 53-1001762-01 User Manual

clear spanning-tree counter

9

clear spanning-tree counter

Clears all spanning-tree counters on the interface.

Synopsis

clear spanning-tree counter [interface| port-channel number | tengigabitethernet slot/port]

Operands

interface

Specifies the interface on which to clear the spanning-tree counters.

port-channel number 

Specifies the port-channel number. The range of valid values is 1-63.

tengigabitethernet 

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

Defaults

There are no default configurations for this command.

Command

Modes

Privileged EXEC mode

Description

Use this command to clear the spanning-tree counters on the interface.

Usage

Guidelines

If the interface operand is not specified, spanning-tree counters are cleared for all interfaces.

Examples

To clear spanning-tree counters for all interfaces:

switch#clear spanning-tree counter

To clear spanning-tree counters for a 10 Gbps Ethernet interface:

switch#clear spanning-tree counter interface tengigabitethernet 0/1

To clear spanning-tree counters for port-channel 23:

switch#clear spanning-tree counter interface port-channel 23

See Also

show spanning-tree