Black Box LW007A User Manual
14
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
2. Quick Start Setup and
Operation for the Hub
Use the following steps to get up and running with
your 3-Mbps Wireless Ethernet Hub. (For more
detailed procedures, see Section 4.1.)
your 3-Mbps Wireless Ethernet Hub. (For more
detailed procedures, see Section 4.1.)
1. Position the Hub in a high, central location,
well away from moving objects and metal
furniture.
furniture.
NOTE
When using more than one Hub, make sure to define
different hopping sequences for each Access Point.
See Chapter 5.
different hopping sequences for each Access Point.
See Chapter 5.
2. Connect the power transformer to a 110/220
VAC power supply and to the DC input socket
on the Hub.
on the Hub.
3. Connect the Hub to the Ethernet backbone
by attaching one end of a regular, uncrossed
10BASE-T cable (not supplied) to the RJ-45
port on the back panel of the Hub (marked
UTP). Attach the other end of the connector
cable to any available Ethernet hub port.
10BASE-T cable (not supplied) to the RJ-45
port on the back panel of the Hub (marked
UTP). Attach the other end of the connector
cable to any available Ethernet hub port.