Black Box LW007A User Manual
71
3-MBPS WIRELESS ETHERNET HUBS, ADAPTERS, AND BRIDGES
6. Temporarily disconnect the first Hub from
the power supply. Verify a high to medium
received radio signal from the second Hub.
received radio signal from the second Hub.
7. Adjust the distance between the Hubs if
necessary.
The two coverage areas are now overlapping.
8. Continue setting up overlapping cells until
the required area is covered.
NOTE
Hubs transmit signals (management frames) all the
time, with or without an Ethernet connection.
time, with or without an Ethernet connection.
4.7 Associating with a Hub
After installation, your Adapter or Bridge will
automatically begin scanning for a Wireless Hub in
the area. Once a Hub is located, the Adapter or
Bridge will synchronize itself to the frequencies
being used, and establish association with the Hub.
automatically begin scanning for a Wireless Hub in
the area. Once a Hub is located, the Adapter or
Bridge will synchronize itself to the frequencies
being used, and establish association with the Hub.
The Hub, together with all the Workstation
Adapters associated with it, constitute a basic
Wireless Ethernet cell.
Wireless Ethernet cell.