Black Box AVSW-VGA8X1A User Manual
Page 13
724-746-5500 | blackbox.com
Chapter 3: Installation
3. Installation
Before installation, power off all devices that will be connected to this system.
Make sure that all devices you will connect are properly grounded.
Place cables away from fluorescent lights, air conditioners, and machines that are
likely to generate electrical noise.
likely to generate electrical noise.
NOTE: If no screen displays, follow these steps:
1. Make sure the device cables are correctly and firmly attached.
2. Set your display device’s input source as VGA.
3. Check the PC BIOS configuration for the video output settings.
4. Connect your computer to the display DIRECTLY to check if the video signal
gets through.
3.1 Connection Pattern
Figure 3-1 shows a typical connection of the 4 x 1 VGA Switch with Serial and
3.5-mm Audio.
3.5-mm Audio.
1
2
3
3
3
3
4
Figure 3-1. AVSW-VGA4X1A connection.